Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cleaning & Sweep Across Highland Park
A chimney sweep in Highland Park typically runs $195-$325 for a standard annual cleaning with Level 1 inspection, while a full Level 2 camera inspection on a multi-flue masonry chimney costs $375-$550. We’re usually scheduling within 3-5 business days during shoulder season, and we carry the DuraFlex and Gelco liner inventory needed for same-day repairs when our camera finds deterioration in old clay tile.
Our crews know Highland Park’s streets well - from the Georgians along Euclid Avenue to the Tudor Revivals near Lakeside Park and the Colonial estates off Preston Road. These aren’t generic suburban homes. They’re century-old luxury properties with two, three, sometimes four original masonry fireplaces sharing multi-flue chimneys built with lime mortar that’s been through decades of North Texas freeze-thaw cycles. That specific housing stock changes everything about how a chimney should be inspected, swept, and documented. Call (972) 284-1392 to book a sweep or inspection, or read on to see what your particular Highland Park chimney actually needs.
Why Emberly Chimney Cleaners Dallas Is Highland Park’s Preferred Chimney Cleaning & Sweep Company
We’ve completed more than 38,000 chimney inspections and cleanings since 2009, and a significant share of those have been in Highland Park’s 75205 and 75209 zip codes. Homeowners here don’t book us because we’re the closest truck. They book us because we show up with a camera, a written price, and technicians who understand that a 1928 Tudor with four fireplaces isn’t serviced the same way as a 2015 prefab unit in Frisco.
Our Highland Park customers leave three-star reviews when we find something expensive. They leave five-star reviews when we show them the camera footage, explain exactly what stage the deterioration is in, and tell them honestly whether it can wait a season. That transparency is Clause 1 of the Haven Standard: written price, written scope, written warranty before any work starts. No exceptions.
Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, but our crews serve Highland Park locally. You’ll get a text when your technician is en route, a name and license number, and a uniformed arrival. Calls are answered live, 24 hours a day, 7 days a week - not a voicemail tree.
Our Chimney Cleaning & Sweep Services in Highland Park

Level 1 Inspection
A Level 1 inspection is the baseline annual service for a Highland Park fireplace that’s in continued use, hasn’t had changes to the appliance or flue, and shows no outward signs of trouble. Our technician examines the readily accessible portions of the chimney exterior, interior, and connecting appliance, checking for obstructions, creosote buildup, and basic structural soundness. For a single-flue gas fireplace in a 1990s renovation off Mockingbird Lane, this may be sufficient. For anything original to the house, we typically recommend starting with Level 2.

Level 2 Inspection
This is where our Chimney Cleaning & Sweep team does the work that actually protects Highland Park homes. NFPA 211 Level 2 requires a camera scan of the entire flue interior, examination of the attic and crawl space where accessible, and documentation of the chimney’s clearance to combustibles. On a 1930s multi-flue chimney in Highland Park, this isn’t optional - it’s essential. Those original clay tile liners are past their design life. The 1980s-1990s gas-log retrofits often vent into unlined or improperly sized flues. And the lime mortar crowns are spalling after repeated freeze-thaw without the homeowner ever noticing, because Dallas-area winters don’t produce enough consistent fireplace use to reveal problems early. Clause 4 of the Haven Standard requires a documented photo record on every job. We include that camera footage and written findings as standard, not an upcharge.

Creosote Removal
Highland Park’s older wood-burning fireplaces accumulate creosote in classes that matter for safety and for how we remove it. First-degree creosote - fluffy soot - brushes out easily. Second-degree glazed creosote, common in fireplaces that get occasional use rather than daily burns, requires rotary chain whipping or chemical treatment. Third-degree glazed creosote is a genuine fire hazard and may require a multi-stage removal process. We recently worked a 1938 Georgian on Euclid Avenue with four original masonry fireplaces sharing two multi-flue chimneys; three flues were clay-tile original with spalling lime mortar at the crown, and one had a 1990s Gelco gas-log insert venting into an unlined flue. Our tech pulled a Level 2 inspection with a camera, found second-degree glazed creosote in the wood-burning flue, and we relined the gas appliance flue with a correctly sized DuraFlex liner before sweeping and documenting all four fireboxes and dampers for the homeowner.

Soot Removal & Annual Sweep
An annual sweep in Highland Park isn’t just about the fireplace you use. It’s about the two or three you don’t. Unused flues in these multi-fireplace homes collect moisture, animal nesting material, and deteriorating masonry debris. The National Fire Protection Association recommends annual inspection for all chimneys, and sweeping when creosote or soot exceeds 1/8 inch. For a Highland Park estate with three or four fireplaces, that often means one active flue needs full cleaning while two others need inspection and light debris removal. We price by the flue, not by the house, and we document what we found in each one.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Highland Park
We source materials through Haven’s buying network to keep customer prices honest: DuraFlex stainless steel liners for relining gas and oil appliance flues, HeatShield service in Highland Park using cerfractory sealant for restoring deteriorated smoke chambers, and Gelco chimney caps and accessories for crown protection on Highland Park’s exposed masonry chimneys. We stock common sizes locally, which means when our camera finds a failed liner on a Tuesday, we’re not ordering parts for next week. For Olympia Chimney components and specialty fittings, our supplier relationships keep turnaround under 48 hours. Every material carries a manufacturer’s warranty, and our installation work is backed by the 365-Day Done Right Promise.
Common Chimney Cleaning & Sweep Problems We See in Highland Park Homes

- Treating century-old multi-flue masonry like modern prefab systems. A 1925 Tudor Revival near Lakeside Park with four fireplaces sharing two chimneys needs camera inspection of every flue, not a flashlight glance at the one the homeowner uses. Skipping the Level 2 inspection on converted gas-log inserts is a persistent mistake we see from out-of-town sweeps.
- Sweeping only the active fireplace and leaving others unswept, uninspected, and open to the elements. In Highland Park’s climate - hard freezes followed by rapid warming, then months of disuse - moisture intrusion and animal nesting in uncapped or deteriorated flues goes undetected until a rare cold snap reveals a blocked or damaged chimney.
- Pulling a City of Dallas permit for relining or structural repair on a Highland Park property. Highland Park maintains its own municipal building department separate from Dallas. Any chimney relining that requires a permit must pass Highland Park’s own inspection process. We’ve seen out-of-town contractors miss this entirely, leaving homeowners with unpermitted work on multi-million-dollar estates and potential title issues at sale.
- Assuming a 1990s gas-log insert in a 1930s fireplace is properly lined. The widespread Highland Park retrofit of gas inserts into original wood-burning fireplaces created a persistent local problem: unlined or improperly lined flues now venting gas appliances. These require full Level 2 inspection, not routine sweep pricing, and often need correctly sized liner installation before they’re safe to operate.
Pricing for Chimney Cleaning & Sweep in Highland Park, TX
Here’s what a typical Chimney Cleaning & Sweep in Highland Park costs, with ranges that reflect the actual market we’re working in:
| Service | Highland Park Price Range |
|---|---|
| Annual sweep with Level 1 inspection (single flue) | $195 - $325 |
| Level 2 camera inspection (single flue) | $375 - $550 |
| Level 2 inspection, multi-flue chimney (2-4 flues) | $650 - $1,100 |
| Creosote removal, standard (1st-2nd degree) | $150 - $275 per flue |
| Glazed creosote removal (3rd degree, chemical/rotary) | $400 - $650 per flue |
| Stainless steel liner installation (DuraFlex, gas appliance) | $2,800 - $4,500 |
| Crown repair/rebuild with HeatShield | $1,200 - $2,400 |
Multi-flue chimneys common in Highland Park’s 1920s-1940s housing stock add complexity: shared walls between flues, offset construction in older masonry, and access limitations in finished attics. We quote every flue separately so you’re not paying for inspection on fireplaces you don’t use, but we flag when an unswept flue poses a safety or moisture risk to the structure. Every price is delivered in writing before work starts - Clause 1 of the Haven Standard, H.A.V.E.N. “Have it in writing.” Free estimates. Free Second Opinion on any competitor’s written quote.
We Also Serve Cities Near Highland Park

Our crews work throughout the Dallas-Fort Worth metro, including Highland Park and neighboring Dallas, Mesquite, Garland, and Irving. Each city gets the same documented inspection standard, but the specific problems we find change with the housing stock - mid-century ranch flues in Garland, newer prefab systems in Irving’s developments, and Highland Park’s century-old multi-fireplace masonry. The process doesn’t change: camera down the flue, written price before work, photo record when it’s done.
Serving Highland Park, TX - Our Local Coverage Area
We’re based in the Highland Park area and know this community well, providing Highland Park Fireplace Services. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cleaning & Sweep in Highland Park

No - but all four flues need inspection annually, and the unused ones often need more attention than you expect. In Highland Park’s climate, disused flues accumulate moisture, nesting debris, and deteriorating masonry without the drying effect of regular fire use. We price by the flue, so you’re not paying for full sweeps on fireplaces you don’t burn. Call (972) 284-1392 for an exact quote - estimates are free.
Yes. The gas insert almost certainly vents into a flue that was designed for wood-burning temperatures and may be unlined or improperly lined for gas appliance operation. NFPA 211 requires a Level 2 inspection with camera documentation for any changed appliance or flue condition. We find this exact scenario weekly in Highland Park. A standard sweep without camera inspection cannot verify liner condition, proper sizing, or clearance to combustibles. Call (972) 284-1392 for an exact quote - estimates are free.
Highland Park permits its own chimney work through its municipal building department, completely separate from Dallas. Any relining, structural repair, or crown rebuild requiring a permit must pass Highland Park’s inspection process. We’ve corrected unpermitted work from out-of-town contractors who assumed Dallas jurisdiction applied. We handle Highland Park permitting as part of our project scope when relining is needed. Call (972) 284-1392 for an exact quote - estimates are free.
Second-degree glazed creosote is the most common serious finding in Highland Park’s occasionally-used wood fireplaces - it forms when fires smolder or when the fireplace isn’t brought to full operating temperature. Third-degree glazed creosote is a genuine chimney fire hazard, hard and shiny as tar, and requires specialized removal. First-degree fluffy creosote is normal and brushes out during standard sweeping. Our camera inspection identifies the class before we quote removal. Call (972) 284-1392 for an exact quote - estimates are free.
Absolutely, and probably with a Level 2 inspection rather than a basic sweep. Unused chimneys in Highland Park’s variable climate suffer moisture intrusion, freeze-thaw damage to lime mortar, and animal nesting without the homeowner noticing. A “couple of winters” is enough time for significant deterioration in a 90-year-old clay tile liner. We document everything with camera footage so you know exactly what condition you’re starting from. Call (972) 284-1392 for an exact quote - estimates are free.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners Dallas, serving Highland Park since 2009.





Before
After
Before
After